Ccit F4 Flash File MT6580 5.1 Dead Lcd Fix Firmware
Download https://bltlly.com/2tugz3
How to Fix Dead LCD and FRP on CCIT F4 with MT6580 5.1 Firmware
If you have a CCIT F4 smartphone that has a dead LCD or FRP (Factory Reset Protection) lock, you may need to flash it with a new firmware. Flashing is the process of installing a new operating system on your device, which can solve various issues and improve performance. However, flashing can also be risky and may void your warranty, so you should only do it if you know what you are doing and have a backup of your data.
In this article, we will show you how to flash your CCIT F4 with MT6580 5.1 firmware, which is compatible with your device and can fix the dead LCD and FRP problems. We will also provide you with the download links for the firmware file, the ROM installer, the USB driver and the ROM installation tutorial. Follow the steps carefully and make sure your device is fully charged before you start.
Step 1: Download the firmware file
The first thing you need to do is to download the firmware file for your CCIT F4. The firmware file is compressed in a zip and inside contains the firmware, ROM installer, USB driver and ROM installation tutorial. You can download it from here[^1^] or here[^2^]. Save it on your computer and extract it using a tool like WinRAR or 7-Zip.
Step 2: Install the USB driver
The next thing you need to do is to install the USB driver for your CCIT F4. The USB driver allows your computer to recognize your device when you connect it via a USB cable. You can find the USB driver inside the extracted firmware folder. Run the setup file and follow the instructions to install it on your computer.
Step 3: Run the ROM installer
The third thing you need to do is to run the ROM installer for your CCIT F4. The ROM installer is a tool that helps you flash the firmware on your device. You can find the ROM installer inside the extracted firmware folder. Run the flash_tool.exe file and follow the instructions to load the scatter file, select the download option and connect your device.
Step 4: Flash the firmware
The final thing you need to do is to flash the firmware on your CCIT F4. This is the most important and critical step, so make sure you do it correctly and do not interrupt the process. To flash the firmware, follow these steps:
Turn off your CCIT F4 and remove the battery (if possible).
Press and hold the volume down button on your device.
Connect your device to your computer via a USB cable while holding the volume down button.
The ROM installer will detect your device and start flashing the firmware automatically.
Wait until you see a green circle with a check mark on the screen, indicating that the flashing is done.
Disconnect your device from your computer and insert the battery (if removed).
Turn on your device and wait for it to boot up.
Congratulations! You have successfully flashed your CCIT F4 with MT6580 5.1 firmware. You should now be able to use your device without any dead LCD or FRP issues. Enjoy! a474f39169